Pride Mobility JAZZY 1121 User Manual download pdf (Page 7)

www.pridemobility.com Transit Securement Package

Informational Supplement 7

FRONT OF

VEHICLE

Securing the Power Chair

NOTE: In addition to following the gen-

eral guidelines below, be sure to follow

all recommendations and instructions

provided by the WTORS manufacturer.



Always secure the power chair in a

forward-facing position in the vehicle.



Attach the four, six, or eight tie-down

straps only to designated, labeled

transit securement points indicated by

anchor symbols on the power chair.

See figures 3 through 10, and also

figure 12.

Tighten the straps to

sufficiently remove all slack.

 Never attach tie-downs to adjustable,

moving, or removable parts of the

power chair such as armrests, front

riggings and wheels.



Position the anchor points for the rear

tie-down straps directly behind the rear

securement points on the power chair.

The front tie-down straps should

anchor to floor points that are spaced

wider than the power chair to provide

increased lateral stability.

See figure 1.

Figure 1. Securing the Power

Chair

Figure 2. Tie-down System

WARNING! Ensure power chairs equipped with a

transit securement system are properly secured to

the motor vehicle during transport. Power chairs

that are not properly secured can become a hazard

to the user and to other vehicle passengers in the

event of a crash, sudden stopping or swerving, as

the power chair could tip or slide out of place.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments