Pride Mobility JAZZY 1121 User Manual download pdf (Page 16)

Transit Securement Package www.pridemobility.com

16 Informational Supplement

 The upper-torso belt anchor point should be anchored above and behind

the top of the power chair occupant’s shoulder to ensure that the

occupant is properly restrained during transport. Both the pelvic and

upper-torso belt restraints should be adjusted as snugly as possible

consistent with user comfort.

WARNING! The buckle of belt restraint systems

should not be located near power chair

components that may come in contact with the

buckle release button in the event of a vehicle

accident or collision.



If your power chair is equipped with a crash-tested pelvic belt that is

anchored to the vehicle, complete the restraint system by attaching the

lower end of the WTORS upper-torso belt to the pelvic belt by referring to

the WTORS manufacturer’s instruction. Crash-tested vehicle-anchored

pelvic belts will be labeled to indicate compliance to ISO 10542.

See

figure 15.

Figure 15. Vehicle-anchored Belt Restraint

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Pride Mobility JAZZY 1121 User Manual Page 16