Pride Mobility JAZZY 1121 User Manual download pdf (Page 13)

www.pridemobility.com Transit Securement Package

Informational Supplement 13

Securing the Power Chair Occupant (Applies to Transit

Systems Rated for Occupied Use Only)

Once the power chair has been properly secured, it is essential that the

power chair occupant be protected for transport.

WARNING! The power chair occupant must be

secured with dynamically crash-tested and

approved pelvic and upper-torso belts or with a

five-point child restraint harness as part of WTORS.

 Always secure the power chair occupant in a forward-facing position in

the vehicle.

 Place the pelvic belt across the front of the pelvis near the upper thighs,

not high over the abdomen.

WARNING! The pelvic belt should be angled

between 45 and 75 degrees to the horizontal when

viewed from the side. However, if the user cannot

achieve this standard, an optional zone of 30 to 45

degrees can be utilised safely.

Figure 11. Recommended Pelvic Belt Placement Angles

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Pride Mobility JAZZY 1121 User Manual Page 13