26
www.pridemobility.com Wrangler
To remove the batteries:
1. Remove the seat and rear shroud.
2. Disconnect all the cables from the battery terminals.
3. Unfasten the battery tie-down straps.
4. Remove the batteries.
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions - smooth, flat, hard driving surfaces with no wind or curves.
You will often face hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind. All of
these driving conditions affect the distance or running time per battery charge. Below are a few sugges-
tions for obtaining the maximum range per battery charge.
Always fully charge your PMV’s batteries prior to your daily use.
Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each tire.
Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.
Limit your baggage weight to essential items.
Try to maintain an even speed while your PMV is in motion.
Avoid stop-and-go driving.
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance in your PMV. Do not use wet-cell batteries, which
have removable caps.
WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-
Cell batteries to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cad-
mium batteries (nicads), or in other common battery types. Deep-cycle batteries are specifically designed
to provide power, drain down their charge, and then accept a relatively quick recharge.
We work closely with our battery manufacturer to provide batteries that best suit your PMV’s specific
electrical demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers.
During shipping, the batteries may encounter temperature extremes that may influence their initial perfor-
mance. Heat diminishes the charge on the battery; cold slows the available power and extends the time
needed to recharge the battery.
It may take a few days for the temperature of your PMV’s batteries to stabilize and adjust to their new
room or ambient temperature. More importantly, it takes a few charging cycles (a partial drain followed
by a full recharge) to establish the critical chemical balance that is essential to a deep-cycle battery’s peak
performance and long life.
IV. BATTERIES AND CHARGING
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals