Pride Mobility Traveller Plus Owner's Manual download pdf (Page 31)

Elite Traveller Plus www.pridemobility.com

DISASSEMBLY

You can disassemble the Travel Scooter into five

pieces: the seat, the front section, the rear section,

the basket and the battery pack. See figure 20. No

tools are required to disassemble or assemble your

Travel Scooter. Always disassemble or assemble

your Travel Scooter on a level, dry surface with

sufficient room for you to work and move

around—about 1.5 metres (five feet) in all direc-

tions. Remember that some Travel Scooter com-

ponents are heavy and you may need assistance

when lifting them.

WARNING! Do not lift beyond your

physical capability. Ask for

assistance when necessary while

disassembling or assembling your

Travel Scooter.

SEAT

REAR SECTION

BATTERY PACK

BASKET

FRONT SECTION

Figure 20. Disassembled Travel Scooter

1. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise

90°. See figure 21. The front wheel must face forward in order to lock the tiller.

2. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when

removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up

on the seat.

3. Remove the battery pack from the Travel Scooter.

Figure 21. Tiller Lock knob (Locked)

LOCKED

POSITION

Figure 22. Tiller Lock Knob (Unlocked)

UNLOCKED

POSITION

Frame Separation

1. Lower the tiller and tighten the tiller adjustment knob.

2. Lift up on the frame release lever until the frame hooks are no longer resting on the lower frame tube.

See figure 23.

3. Slowly separate the two sections of the Travel Scooter.

VII. DISASSEMBLY AND ASSEMBLY

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

No comments

Pride Mobility Traveller Plus Owner's Manual Page 31